Grade 10 Products

Grade 10 Chain Sling Chart

  • The loadings used for Grade 10 alloy chain slings are determined on the basis hat the item is used in a symmetrical format in a multi leg sling.

    Grade 10 alloy chain slings should not be used in hazardous conditions which would include offshore applications, the lifting of people or dangerous loads such as liquid metals, nuclear, corrosive or caustic substances and materials.

    If an asymmetrical lift is required of a Grade 10 alloy chain sling, it should be referred back to the suppliers to establish a safe lift procedure.

    If a Grade 10 alloy chain sling is being used against sharp edges or corners, the W.L.L. will be affected and should be referred to the supplier to establish a safe lift load limit.

Grade 10 Short Link Chain – G10C

  • Grade 10 alloy steel, heat treated.

    Blue painted finish.

    Grade 10 vs Grade 8 increase in load capacity upto 25%. Reduction of slings weight upto 40%. Better wear resistance enabling longer performance.

    Meets the performance requirements of BS EN 818-2 +25% of loads.

    Temperature range: -29°C to +205°C.

    Marked with material grade and manufacturers ID.

Grade 10 Master Link – D Series – G10ML

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    Meets the performance requirements of BS EN 1677-4 +25% of loads.

    Suitable for use with grade 10 chains and wire/fibre rope slings.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

Grade 10 Quad Master Link Assembly – DL Series – G10QA

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    Meets the performance requirements of BS EN 1677-4 +25% of loads.

    Suitable for use with grade 10 chains and wire/fibre rope slings.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

    Link with flat available on request (DLF series).

Grade 10 Quad Master Link Assembly – DE Series – G10QADE

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    Meets the performance requirements of BS EN 1677-4 +25% of loads.

    Suitable for use with grade 10 chains and wire/fibre rope slings.

    Oversized sub links.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

    Link with flat available on request (DEF series).

Grade 10 Single Leg Master Link – CMLS Series – G10CMLS

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    For hook No 25 DIN 15401.

    Suitable for use with grade 10 chains and wire/fibre rope slings.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

Grade 10 Single Leg Master Link – DG1 Series – G10DG1

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    Meets the performance requirements of BS EN 1677-4 +25% of loads.

    Suitable for use with grade 10 chains and wire/fibre rope slings.

    Specially designed for direct clevis connection of hooks to chain.

    No reduction in W.L.L. of sling when using the shortening hook.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

Grade 10 2 Leg Master Link – DG2 Series – G10DG2

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    Meets the performance requirements of BS EN 1677-4 +25% of loads.

    Suitable for use with grade 10 chains and wire/fibre rope slings.

    Specially designed for direct clevis connection of hooks to chain.

    No reduction in W.L.L. of sling when using the shortening hook.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

Grade 10 Quad Master Link Assembly – DG4 Series – G10DG4

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    Meets the performance requirements of BS EN 1677-4 +25% of loads.

    Suitable for use with grade 10 chains and wire/fibre rope slings.

    Specially designed for direct clevis connection of hooks to chain.

    No reduction in W.L.L. of sling when using the shortening hook.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

Grade 10 Single Leg Master Link – DCR1 Series – G10DCR1

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    Meets the performance requirements of BS EN 1677-4 +25% of loads.

    Suitable for use with grade 10 chains and wire/fibre rope slings.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

Grade 10 2 Leg Master Link – DCR2 Series – G10DCR2

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    Meets the performance requirements of BS EN 1677-4 +25% of loads.

    Suitable for use with grade 10 chains and wire/fibre rope slings.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

Grade 10 Quad Master Link Assembly – DCR4 Series – G10DCR4

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    Meets the performance requirements of BS EN 1677-4 +25% of loads.

    Suitable for use with grade 10 chains and wire/fibre rope slings.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

Grade 10 Component Connector – G10CC

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    Meets the performance requirements of BS EN 1677-1 +25% of loads.

    Suitable for use with grade 10 chains and wire/fibre rope slings.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

Grade 10 Clevis Grab Hook – G10CGH

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    Meets the performance requirements of BS EN 1677-4 +25% of loads.

    Clevis fitting enables direct connection to chain.

    No reduction in W.L.L of the chain sling capacity if used as a shortening device.

    For correct safe use of the hook as a shortening device it must be assembled to the master link via 3 links of chain.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

Grade 10 Eye Grab Hook – G10EGH

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    Meets the performance requirements of BS EN 1677-4 +25% of loads.

    No reduction in W.L.L of the chain sling capacity if used as a shortening device.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

Grade 10 Clevis Sling Hook c/w Safety Catch – G10CSH

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    Meets the performance requirements of BS EN 1677-4 +25% of loads.

    Clevis fitting enables direct connection to chain.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

Grade 10 Eye Sling Hook c/w Safety Latch – G10ESH

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    Meets the performance requirements of BS EN 1677-4 +25% of loads.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

Grade 10 Clevis Self Locking Hook – G10CSLH

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    Meets the performance requirements of BS EN 1677-4 +25% of loads.

    Clevis fitting enables direct connection to chain.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

Grade 10 Eye Self Locking Hook – G10ESLH

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    Meets the performance requirements of BS EN 1677-4 +25% of loads.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

Grade 10 Swivel Self Locking Hook – G10SSLH

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    Meets the performance requirements of BS EN 1677-4 +25% of loads.

    Large swivel eye makes assembly easier.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

Grade 10 Swivel Self Locking Hook with Ball Bearing – G10SSLH-U

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    Meets the performance requirements of BS EN 1677-4 +25% of loads.

    Large swivel eye makes assembly easier.

    Ball bearing enables rotation under load.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

Grade 10 Integrated Eye Grab Hook – GIE Series

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    Meets the performance requirements of BS EN 1677-4 +25% of loads.

    No W.L.L reduction when used as a lifting or shortening in a grade 10 sling in accordance with performance requirement – BS EN 1677-7.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

Grade 10 Eye Foundry Hook – G10EFH

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    Meets the performance requirements of BS EN 1677-4 +25% of loads.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

Grade 10 Clevis C Hook – G10CCH

  • Grade 10 alloy steel, quenched and tempered.

    Grey painted finish.

    Meets the performance requirements of BS EN 1677-4 +25% of loads.

    Clevis fitting enables direct connection to chain.

    Marked with material grade, manufacturers ID, size, product ID mark and traceability code.

Grade 10 Chain Tag – G10TAG

  • Suitable for single and multi leg slings.

    Supplied with wire and ferrule for attachment to sling.

Grade 10 Spare Safety Catch Kit for Hooks – FSL

  • Suits grade 10 lifting components.

    Packed in individual bags containing forged catch, spring and retaining pin.

    Supplied unassembled

Grade 10 Spare Locking System Kit for Self Locking Hooks – LDN

  • Suits grade 10 lifting components.

    Packed in individual bags containing release lever, spring and retaining pin.

    Supplied unassembled.

Grade 10 Spare Clevis Load and Retaining Pin

  • Suits grade 10 lifting components.

    Packed in individual bags containing load pin and retaining pin.

    Supplied unassembled.

Grade 10 Spare Centre Pin and Bush – VCP

  • Suits grade 10 lifting connectors.

    Packed in individual packs containing centre pin and bush.

    Supplied unassembled.