Grade 8 Products

Grade 8 Chain Sling Chart

  • The loadings used for Grade 8 alloy chain slings are determined on the basis hat the item is used in a symmetrical format in a multi leg sling.

    Grade 8 alloy chain slings should not be used in hazardous conditions which would include offshore applications, the lifting of people or dangerous loads such as liquid metals, nuclear, corrosive or caustic substances and materials.

    If an asymmetrical lift is required of a Grade 8 alloy chain sling, it should be referred back to the suppliers to establish a safe lift procedure.

    If a Grade 8 alloy chain sling is being used against sharp edges or corners, the W.L.L. will be affected and should be referred to the supplier to establish a safe lift load limit.

Grade 8 Short Link Chain – G8C

  • Alloy steel heat treated, quenched and tempered.

    Black painted finish.

    Conforms to BS EN 818-2.

    Temperature range: -40 °C to +400 °C (Reductions in W.L.L apply).

Grade 8 Master Link – G8ML

  • Alloy steel, quenched and tempered.

    Red painted finish.

    Conforms to BS EN 1677-4.

    Temperature range -40 °C to +400 °C (Reductions in W.L.L apply).

    Suitable for use with grade 8 chains and wire/fibre rope slings.

    Designed for use with 1 or 2 leg slings.

    T ranges have large inside widths & lengths to allow for sling hardware and crane hooks.

Grade 8 Quad Master Link Assembly – G8QA

  • Alloy steel, quenched and tempered.

    Red painted finish.

    Conforms to BS EN 1677-4.

    Temperature range: -40 °C to +400 °C (Reductions in W.L.L apply).

    Suitable for use with Grade 8 Chains and wire/fibre rope slings.

    Designed for use with 3 or 4 leg slings.

    T ranges have large inside widths & lengths to allow for sling hardware and crane hooks.

Grade 8 Component Connector – G8CC

  • Alloy steel, quenched and tempered.

    Red painted finish.

    Conforms to BS EN 1677-1.

    Suitable for use with grade 8 chains.

    Temperature range: -40 °C to +400 °C (Reductions in W.L.L apply).

    Designed for easy attaching of hooks and master links to other Grade 8 Chains and fittings.

Grade 8 Clevis Grab Hook – G8CGH

  • Alloy steel, quenched and tempered.

    Red painted finish.

    Conforms to BS EN 1677-1.

    Temperature range: -40 °C to +400 °C (Reductions in W.L.L apply).

    Clevis fitting enables direct connection to chain.

    Our grab hooks can be used as a shortening device without any reduction of SWL of the chain sling capacity.

    The ‘T’ shape in the bowl of the hook supports the chain and helps prevent possible deformation of the link when used as a shortening device.

    For correct safe use, the clevis grab hook must be assembled to the master link via three links of chain.

Grade 8 Eye Type Grab Hook – G8EGH

  • Alloy steel, quenched and tempered.

    Red painted finish.

    Conforms to BS EN 1677-1.

    Temperature range: -40 °C to +400 °C (Reductions in W.L.L apply).

    Our grab hooks can be used as a shortening device without any reduction of SWL of the chain sling capacity.

    The ‘T’ shape in the bowl of the hook supports the chain and helps prevent possible deformation of the link when used as a shortening device.

Grade 8 Clevis Shortening Clutch – G8CSC

  • Alloy steel, quenched and tempered.

    Red painted finish.

    Conforms to BS EN 1677-1.

    Temperature range: -40 °C to +400 °C (Reductions in W.L.L apply).

    Clevis fitting enables direct connection to chain.

    For correct safe use of the clutch as a shortening device, it must be assembled to the master link via 3 links of chain.

    The use of the Clevis Shortening Clutch will allow 100% of the chain sling capacity.

Grade 8 Clevis Sling Hook c/w Safety Catch – G8CSH

  • Alloy steel, quenched and tempered.

    Red painted finish.

    Conforms to BS EN 1677-2.

    Temperature range: -40 °C to +400 °C (Reductions in W.L.L apply).

    Clevis fitting enables direct connection to chain.

Grade 8 Eye Sling Hook c/w Safety Catch – G8ESH

  • Alloy steel, quenched and tempered.

    Red painted finish.

    Conforms to BS EN 1677-2.

    Temperature range: -40 °C to +400 °C (Reductions in W.L.L apply).

    Clevis fitting enables direct connection to chain.

Grade 8 Clevis Self Locking Hook (SNC Series) – G8CSLH

  • Alloy steel, quenched and tempered.

    Red painted finish.

    Conforms to BS EN 1677-3.

    Temperature range: -40 °C to +400 °C (Reductions in W.L.L apply).

    Clevis fitting enables direct connection to chain.

Grade 8 Eye Type Self Locking Hook (SNE Series) – G8ESLH

  • Alloy steel, quenched and tempered.

    Red painted finish.

    Conforms to BS EN 1677-3.

    Temperature range: -40 °C to +400 °C (Reductions in W.L.L apply).

Grade 8 Swivel Self Locking Hook (106 Series) – G8SSLH

  • Alloy steel, quenched and tempered.

    Red painted finish.

    Conforms to BS EN 1677-3.

    Temperature range -40°C to +400°C (Reductions in W.L.L apply).

    Large swivel eye makes assembly to wire/fibre rope slings (with thimbles) easier.

Grade 8 Clevis Self Locking Hook (103 Series) – G8CSLHL

  • Alloy steel, quenched and tempered.

    Red painted finish.

    Conforms to BS EN 1677-3.

    Temperature range -40°C to +400°C (Reductions in W.L.L apply).

    Clevis fitting enables direct connection to chain.

Grade 8 Eye Type Self Locking Hooks (102 Series) – G8ESLHL

  • Alloy steel, quenched and tempered.

    Red painted finish.

    Conforms to BS EN 1677-3.

    Temperature range -40°C to +400°C (Reductions in W.L.L apply).

Grade 8 DNV Master Link – F

  • Manufactured with special alloy steels having good ductility (42J min.) at low temperatures (-40ºC)

    Purple painted finish.

    Hardness value of 32-35 HRC providing superior protection from Hydrogen embrittlement.

    Average impact energy (Charpy) at -40°C: 42 Joules minimum.

    Operational temperature range: -40°C to + 200°C.

    Conforms to BS EN 1677-4.

    Certified to International Standards DNVGL-ST-E271 – 2.7-1, DNVGL-ST-E273 – 2.7-3, BS EN ISO 10855-2.

    Specially designed for use on offshore containers.

    Minimum breaking load is 5 times the W.L.L.

    Individually proof tested to 2.5 times the W.L.L.

Grade 8 DNV Quad Master Link Assembly – FM

  • Manufactured with special alloy steels having good ductility (42J min.) at low temperatures (-40ºC)

    Purple painted finish.

    Hardness value of 32-35 HRC providing superior protection from Hydrogen embrittlement.

    Average impact energy (Charpy) at -40°C: 42 Joules minimum.

    Operational temperature range: -40°C to + 200°C.

    Conforms to BS EN 1677-4.

    Certified to International Standards DNVGL-ST-E271 – 2.7-1, DNVGL-ST-E273 – 2.7-3, BS EN ISO 10855-2.

    Specially designed for use on offshore containers.

    Minimum breaking load is 5 times the W.L.L.

    Individually proof tested to 2.5 times the W.L.L.

Grade 8 Fram Master Link – FML

  • Alloy steel, quenched and tempered.

    Blue painted finish.

    Type approved according to DNV GL.

    Conforms to BS EN 1677-4.

    Minimum breaking load is 5 times the W.L.L.

Grade 8 Fram Quad Master Link Assembly – FQA

  • Alloy steel, quenched and tempered.

    Blue painted finish.

    Type approved according to DNV GL.

    Conforms to BS EN 1677-4.

    Minimum breaking load is 5 times the W.L.L.

Grade 8 Fram Pipe Hook – FPH

  • Alloy steel.

    Blue painted finish.

    Minimum breaking load is 4 times the W.L.L.

Green Pin® Heavy Duty Master Link – GPHDML

  • Grade 8, alloy steel.

    Painted silver & green.

    Minimum breaking load is 5 times the W.L.L.

    Temperature range -40°C up to +200°C.

    Innovative, fully forged production method for heavy duty lifting.

    Non-destructive testing to rule out cracks.

Green Pin® Grade 8 Master Link – GPG8ML

  • Grade 8, alloy steel.

    Painted white.

    Conforms to BS EN 1677-4.

    Minimum breaking load is 4 times the W.L.L.

    Temperature range -40°C up to +200°C.

    From 50t without flat part.

Green Pin® Grade 8 Quad Link Assembly – GPG8QA

  • Grade 8, alloy steel.

    White painted.

    Conforms to BS EN 1677-4.

    Minimum breaking load is 4 times the W.L.L.

    Temperature range -40°C up to +200°C.

    From 60t without flat part.

Green Pin® Grade 8 Component Connector – GPG8CC

  • Grade 8, alloy steel, quenched and tempered.

    White painted.

    Conforms to BS EN 1677-1.

    Minimum breaking load is 4 times the W.L.L.

    Temperature range -40°C up to +200°C.

Green Pin® Grade 8 Clevis Grab Hook – GPG8CGH

  • It all begins with an idea. Maybe you Grade 8, alloy steel, quenched and tempered.

    White painted.

    Conforms to BS EN 1677-1.

    Minimum breaking load is 4 times the W.L.L.

    Temperature range -40°C up to +200°C.

Green Pin® Grade 8 Eye Grab Hook – GPG8EGH

  • Grade 8, alloy steel, quenched and tempered.

    White painted.

    Conforms to BS EN 1677-1.

    Minimum breaking load is 4 times the W.L.L.

    Temperature range -40°C up to +200°C.

Green Pin® Grade 8 Clevis Sling Hook – GPG8CSH

  • Grade 8, alloy steel, quenched and tempered.

    White painted.

    Conforms to BS EN 1677-2.

    Minimum breaking load is 4 times the W.L.L.

    Temperature range -40°C up to +200°C.

Green Pin® Grade 8 Eye Sling Hook – GPG8ESH

  • Grade 8, alloy steel, quenched and tempered.

    White painted.

    Conforms to BS EN 1677-2.

    Minimum breaking load is 4 times the W.L.L.

    Temperature range -40°C up to +200°C.

Green Pin® Grade 8 ROV Eye Sling Hook – GPG8ROVESH

  • Grade 8, alloy steel, quenched and tempered.

    White painted.

    Minimum breaking load is 4 times the W.L.L.

    Temperature range -40°C up to +200°C.

Green Pin® Grade 8 Clevis Self Locking Hook GKC – GPG8CSLH

  • Grade 8, alloy steel, quenched and tempered.

    White painted.

    Minimum breaking load is 4 times the W.L.L.

    Temperature range -40°C up to +200°C.

    EN rated alternative XLC available upon request.

Green Pin® Grade 8 Clevis Self Locking Hook XLC – GPG8CSLHEN

  • Grade 8, alloy steel, quenched and tempered.

    White painted.

    Conforms to BS EN 1677-3.

    Minimum breaking load is 4 times the W.L.L.

    Temperature range -40°C up to +200°C.

Green Pin® Grade 8 Eye Self Locking Hook – GPG8ESLH

  • Grade 8, alloy steel, quenched and tempered.

    White painted.

    Conforms to BS EN 1677-3.

    Minimum breaking load is 4 times the W.L.L.

    Temperature range -40°C up to +200°C.

    From 12.8t without flat part.

Green Pin® Grade 8 Clevis Swivel Self Locking Hook – GPG8CSSLH

  • Grade 8, alloy steel, quenched and tempered.

    White painted.

    Conforms to BS EN 1677-3.

    Minimum breaking load is 4 times the W.L.L.

    Temperature range -40°C up to +200°C.

    Equipped with needle roller thrust bearing to enable rotation under load.

Green Pin® Grade 8 Eye Swivel Self Locking Hook – GPG8ESSLH

  • Grade 8, alloy steel, quenched and tempered.

    White painted.

    Conforms to BS EN 1677-3.

    Minimum breaking load is 4 times the W.L.L.

    Temperature range -40°C up to +200°C.

    Equipped with needle roller thrust bearing to enable rotation under load.

Green Pin® Grade 8 Clevis Swivel Sling Hook with Safety Catch

  • Grade 8, alloy steel, quenched and tempered.

    White painted.

    Conforms to EN 1677-2.

    Minimum breaking load is 4 times the W.L.L.

    Temperature range -40°C up to +200°C.

Green Pin® Grade 8 Eye Swivel Sling Hook with Safety Catch – GPG8ESSH

  • Grade 8, alloy steel, quenched and tempered.

    White painted.

    Conforms to BS EN 1677-2.

    Minimum breaking load is 4 times the W.L.L.

    Temperature range -40°C up to +200°C.

    Equipped with needle roller thrust bearing to enable rotation under load.

Green Pin® Grade 8 Weld on Hook – GPG8WH

  • Grade 8, alloy steel, quenched and tempered.

    White painted.

    Minimum breaking load is 4 times the W.L.L.

    Temperature range -40°C up to +200°C.

    Welding must be done in accordance with DIN 5817 resp. 15429, by a qualified welder according to BS EN 287-1.

Green Pin® Grade 8 Eye Foundry Hook – GPG8EFH

  • Grade 8, alloy steel, quenched and tempered.

    White painted.

    Minimum breaking load 4 times the W.L.L.

    Temperature range -40°C up to +200°C.

    From 8.2t without flat part.e.

Green Pin® Grade 8 Flat Web Sling Hook

  • Grade 8, alloy steel, quenched and tempered.

    White painted.

    Minimum breaking load is 4 times the W.L.L.

    Temperature range -40°C up to +200°C.

Green Pin® Grade 8 Flat Web Sling Self Locking Hook – GPG8WSLH

  • Grade 8, alloy steel, quenched and tempered.

    White painted.

    Minimum breaking load is 4 times the W.L.L.

    Temperature range -40°C up to +200°C.

Green Pin® Grade 8 Omega Link – GPG8OL

  • Grade 8, alloy steel, quenched and tempered.

    White painted.

    Conforms to BS EN 1677-1.

    Minimum breaking load is 4 times the W.L.L.

    Temperature range -40°C up to +200°C.

Green Pin® Grade 8 Pear Shaped Link

  • Grade 8, alloy steel, quenched and tempered.

    White painted.

    Conforms to EN 1677-4.

    Minimum breaking load is 4 times the W.L.L.

    Temperature range -40°C up to +200°C.

Grade 8 Spare Locking System Kit for Self Locking Hooks

  • Suits grade 8 lifting components.

    Packed in individual bags containing release lever, spring and retaining pin.

    Supplied unassembled.

Grade 8 Spare Safety Catch Kit for Hooks – FSL Series

  • Suits grade 8 clevis and eye type sling hooks.

    Packed in individual bags containing forged catch, spring and retaining pin.

    Supplied unassembled.

Grade 8 Spare Clevis Load and Retaining Pin

  • Suits grade 8 lifting components.

    Packed in individual bags containing load pin and retaining pin.

    Supplied unassembled..

Grade 8 Spare Centre Pin and Bush – VCP

  • Suits Grade 8 lifting connectors.

    Packed in individual packs containing centre pin and bush.

    Supplied unassembled.

BS EN 818 Chain Tag – G8TAG

  • Suitable for single and multi leg slings.

    Supplied with wire and ferrule for attachment to sling.