Wire Rope Fittings & Accessories

Wire Rope Grip BS EN Style – Type A – WRGEN

  • Malleable steel ungrooved bridge. Mild steel u-bolt and nuts.

    Electro galvanised finish.

    Meets the performance requirements of BS EN 13411 Part 5 Type A (Formerly DIN 1142). 13mm is additional and proportional to the standard.*

    Marked with size on bridge and manufacturers ID on bridge and U bolt.

Wire Rope Grip BS EN 13411 Part 5 Type B – WRGUS

  • AISI 1015 steel or equivalent u-bolt, AISI 1035/1045 steel or equivalent grooved bridge.

    Hot dipped galvanised bridges. Electro galvanised u-bolts and nuts, u-bolts painted.

    Meets the performance requirements of BS EN 13411 Part 5 Type B (formerly US Fed. Spec. FF-C450D). 13mm is additional and proportional to the standard.*

    Marked with size and manufacturers ID on the bridge.

Commercial Wire Rope Grip – WRGC

  • Cast steel bridge. Mild steel u-bolt and nuts.

    Electro galvanised finish.

    Marked with size on bridge.

Green Pin® Wire Rope Grip Type B – G-6240 – GPWRGB

  • Drop forged high tensile steel SAE 1045 grooved bridge. SAE 1015 u-bolt.

    Hot dipped galvanised finish.

    Meets the performance requirements of BS EN 13411 Part 5 Type B (formerly US Fed. Spec. FF-C450D).

    Marked with size and manufacturers ID on the bridge.

Eureka Wirelock – EWL

  • Wire rope clamp approved for lifting.

    Rope dia 4-5 and 6 – cast steel zinc plated finish.

    Rope dia 8 to 15-16 – drop forged steel hot dipped galvanised.

Alloy Steel Large Eye Hook with Safety Catch – AHE

  • Alloy steel, quenched and tempered.

    Red painted finish.

    Minimum breaking load is 4.5 times the W.L.L.

    Marked with CE, W.L.L, manufacturers ID and product ID mark.

Alloy Steel Swivel Hook with Safety Catch – AHS

  • Alloy steel, quenched and tempered.

    Red painted finish.

    Minimum breaking load is 4.5 times the W.L.L.

    Marked with CE, W.L.L, manufacturers ID and product ID mark.

Wire Rope Thimble – BS Style

  • Mild steel.

    Hot dipped galvanised finish.

    Meets the performance requirements of BS EN 13411-1.*

    Meets the performance requirements of the withdrawn standard BS 464.*

    For use with wire ropes.

Heavy Duty Wire Rope Thimble – US Style – TUS

  • Mild steel.

    Hot dipped galvanised finish.

    Meet the performance requirements of US Fed. Spec. FF-T 276-b type 3 and BS EN 13411-1.*

    For use with wire ropes.

Wire Rope Commercial Thimble – TC

  • Mild steel.

    Electro galvanised finish.

    For use with wire and fibre ropes.

    Not for use in lifting applications.

Wire Rope Tubular Thimble Without Gusset – TUBE

  • Mild steel.

    Electro galvanised finish.

    For use with wire ropes.

    Marked with product ID mark.

    Supplied in open finish or with welded gusset plate.

Wire Rope Tubular Thimble With Gusset – TUBEG

  • Mild steel.

    Electro galvanised finish.

    For use with wire ropes.

    Marked with product ID mark.

    Supplied in open finish or with welded gusset plate.

Towing Fibre Rope Thimble – TFR

  • Mild steel.

    Hot dipped galvanised and self colour finish.

    For use with fibre ropes.

Forged Steel Pennant Line Thimble – TPL

  • Mild steel.

    Hot dipped galvanised and self colour finish.

    For use with wire ropes.

Green Pin® Open Spelter Socket – GPOSS

  • High tensile steel.

    Hot dipped galvanised finish.

    Temperature range -20ºC up to +200°C.

    Marked with CE, manufacturers ID, size, product ID mark and traceability code.

Green Pin® Closed Spelter Socket – GPCSS

  • High tensile steel.

    Hot dipped galvanised finish.

    Temperature range -20ºC up to +200°C.

    Marked with CE, manufacturers ID, size, product ID mark and traceability code

Green Pin® Open Wedge Socket – GPOWS

  • High tensile steel.

    Hot dipped galvanised finish.

    Sizes generally to BS EN 13411-6.

    Temperature range -20ºC up to +200°C.

J & F Open Spelter Socket – SOA

  • Hot dipped galvanised finish.

    Sizes up to 1 1/8“ inclusive are produced with ZG35 CrMo or ZG42 CrMo steel or equivalent.

    Sizes from 1 1/4” above are produced with ZG16Mn steel or equivalent.

    All cast steel sockets up to 1 1/8” have no grooves.

    All cast steel sockets from 1 1/4” above are supplied with grooves.

    Marked with Manufacturers ID, size and traceability code.

J & F Closed Spelter Socket – SOC

  • Hot dipped galvanised finish.

    Sizes up to 1 1/8“ inclusive are produced with ZG 35 CrMo or ZG42 CrMo steel or equivalent.

    Sizes from 1 1/4” above are produced with ZG16Mn steel or equivalent.

    All cast steel sockets up to 1 1/8” have no grooves.

    All cast steel sockets from 1 1/4” above are supplied with grooves.

    Marked with Manufacturers ID, size and traceability code.

Aluminium Ferrule EN 13411-3 – AF

  • Brushed aluminium.

    Natural finish.

    Conforms to BS EN 13411-3.